Spectrapure 99% Rejection SpectraSelect Plus 90-GPD RO Membrane

Introduction

OVERVIEW:
SpectraSelect Plus membranes set the industry standards for highest rejection, flow rate, and longevity. SpectraSelect Plus 99% Rejection Membranes effectively DOUBLES post Deionizing cartridge life!

SpectraPureSpectraSelectPlus membranes are treated with a proprietary process to enhance rejection, increase production and speed rinse up times. These treated membranes are then hand-picked and individually tested for consistent ultra-high rejection. No other membrane can match the SpectraSelectPlus for long life and the ability to remove silica phosphates, nitrates, and heavy metals.

SpectraSelectPlus Membranes are standard equipment in our Maxcap, and UHE RO/DI Systems and can also be used available as an upgrade replacement option for most Reverse Osmosis Systems.

FEATURES:
– Typical stabilized conductivity rejection 99%, minimum conductivity rejection 98%.
– Membranes produce rated GPD 20% at 60 psi.
– *Permeate flow and conductivity rejection based on 500 ppm, 77F (25C) softened water feed, 15% recovery and the specified applied pressure.

Working limits:
– Maximum temperature 113F (45c)
– pH range 2-11
– Free chlorine limits less than 0.1ppm
– Maximum feed water silt density index (SDI) 5