Neptune Systems DC24 BARE Cable (10 feet)

Introduction

DC24 BARE on ONE END CABLE The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly. There are also two DC24 cables we have available at this time that connect to these outputs. The cables are available in two varieties: This cable is 10′ Male/Male cable that has the DC24 connector on one end and two tinned wire leads on the other. They can wire any DC24 device to the cable and power it on/off from the DC24 outputs. NOTE: Device must be rated under 30W.