DC24 to Bare wire cable – 10′ – Neptune Systems

Introduction

You can now use the 24vDC ports that are on the 1Link module and the EnergyBar 832. The 24v DC port will give you the ability to run solenoids, pumps, and fans off a single wire, without having to use any standard outlets for power. The 24v DC ports have give you full outlet style control in a much smaller package. You can use any accessory up to 24V DC like pumps, fans, and solenoids just as long as they draw less than 35 watts.

The DC24 to Bare Wire Accessory Cable has two bare ends that have been tinned and ready for the accessory of your choice. The other end of the cable will connect to the 24v DC port on the EnergyBar 832 or the 1Link module. The port can be switched on and off just like any other outlet.

• 10 feet long

Note: Accessories must not draw more than 35 watts.