Heater Controller – IceCap

Introduction

The IceCap Heater Controller allows precise temperature regulation for your aquarium by connecting up to two heating elements (sold separately). With dual-heating power jacks and support for up to 1000 watts, this controller ensures a stable aquatic environment. For added safety, it can be integrated with an external aquarium system controller.

Features:

• Dual Grounded Output Heater Control Supports up to two heating elements.
• High Capacity Accommodates a combined total of 1000 watts.
• Accurate Heat Control Maintains precise temperature regulation.
• Freshwater & Marine Compatible Designed for all aquarium types.
• 1-Year Limited Warranty Ensures product reliability.

Specifications:

Controller Requirement

Heater Controller Only Requires a Proper-Sized Heater(s) to Operate.

Indoor Use Only.

LED Indicators:

• Blue LED Indicates power is ON.
• Red LED Indicates heater power is ON.

Button Functions:

• Power/Set Button: Hold for 5 seconds to turn the controller ON/OFF. Press once to enter target temperature setting mode.
• C/F Button: Press to switch between Celsius and Fahrenheit.
• Plus (+) Button: Increases the target temperature. Press to save.
• Minus (-) Button: Decreases the target temperature. Press to save.

Controller Temperature Calibration:

1. Compare the aquarium’s water temperature on a separate thermometer with the Heater Controller display.
2. If there is a large discrepancy, press and hold <+> and <-> simultaneously for 3 seconds until the water temperature display blinks.
3. Adjust up or down in 5.0 (C/F) increments using the <+> or <-> buttons.
4. Press to confirm the calibration setting.
5. The bottom display will revert to showing the water temperature.

Order your IceCap Heater Controller today and ensure your aquarium maintains a stable water temperature!