Kessil A150W E Series Amazon Sun light

Introduction

ShimmerBeautiful shimmering effect gives your tank a natural, sunlit look rivaling MH. It’s like connecting with your own piece of the ocean.Spectral PrecisionEach model comes from thousands of research and testing hours determining the precise spectral points for optimum growth and color.Color MixingDense Matrix LED technology blends different light wavelengths before they leave the light, providing uniform color throughout your tank. The single light source eliminates the spotlight effect, effectively spreading the light over a wide area.UVOur proprietary blend of precision UV light encourages vibrant coral color.DesignMetal housing with accent ring signifying which model light you have complements your installation. Engineered for long life, quiet operation, efficient cooling and maximum performance, all in a compact, low maintenance and attractive design.6700K* Special Blend – Amazon SunBring the power of the sun to your freshwater tank. This model is a true 6,700 K light that promotes lush plants and vibrant aquascapes.*Color temperature for reference only, and is not a direct measurement of CCTPRODUCT SPECIFICATIONSIlluminator Power Consumption 32 Watt Maximum Input Voltage 24 VDC 5%Listed Power Supply Input 100-240 VAC 50-60 Hz Output 24 VDC, Maxiumum 2.1A, 50 WattsBEST PRACTICES FOR INSTALLATION AND MAINTENANCETo hang the LED for aquarium use from a wood, acoustic or similarly textured ceiling, mount 2 metal hooks and hang the light by its brackets. The metal hooks should have diameters of at least 2.5mm and thread numbers of at least 6.For sufficient airflow, the intake and venting holes should be at least 12 inches from surrounding obstructions.Kessil recommends A150W lights to be placed 1 to 2 feet above the aquarium being illuminated.Plug the light power supply into an outlet with the proper specifications.Do not use the A150W lights outdoors. They are intended for indoor use only.Keep the air vents and fan clear of dust. To clean the fan, insert the tip of a CO2 (or similar) dust blower into one of the vent slots and spray.Keep the diffuser (lens) clean. If the diffuser becomes contaminated with water, dust or other particles, clean it with isopropyl alcohol. Wet a cotton swab or a napkin in isopropyl alcohol and gently wipe the surface of the diffuser and let it dry.