Mag-Float Replacement Pad – For Mag-Float 360A Acrylic Aquarium Cleaner – LARGE

Introduction

Replacement pad for the Float-360A Floating acrylic aquarium cleaner (Note: Contains 1 pad and 1 felt)

Instructions:

• Remove old pad/felt entirely without damaging the plastic surface of the magnet.
• Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (Use latex gloves).
• Wait until plastic surface is completely dry before applying new pad/felt.
• Peel back paper backing from new pad/felt approximately a quarter of the way.
• Line up the new pad/felt with the plastic surface area of the magnet.
• Apply pressure to the pad/felt are that has been peeled off so it glues on to the plastic surface of the magnet.
• Apply pressure to the rest of the new pad/felt as you slowly remove the rest of the paper backing (This will avoid any air bubbles to be formed between the plastic surface and pad/felt).
• Felt is applied to the magnet that contains the logo Mag-Float
• Pad is applied to the magnet that does not contain the logo Mag-Float