SR AQUARISTIK PRO SKIM 80 IN-SUMP PROTEIN SKIMMER

Introduction

• Simple to set up and operate
• Extremely efficient
• Quality construction
• Quick and Precise adjustment valve allows fast precision tuning of the skimmer water level to control wet/dry foam production
• Bubble chamber maximizes contact time allowing for efficient skimming
• Cone construction maximizes skimming effect

Product Description:

The SR Aquaristik PRO Skim 80 In-Sump Protein Skimmer quickly removes organic waste from saltwater aquarium water. A powerful needle wheel impeller pump creates ideal sized air bubbles that force organic protein into a collection cup for easy removal. The SR PRO Skim 80 is recommended for aquariums from 50-80 gallons. SR PRO Skim 80 Skimmers are built using flame polished cell-cast acrylic. The SR Protein Skimmer is equipped with bubble plates, modified cone necks, air silencers and needle wheel impellers for maximum performance and quiet operation. They also have minimized footprints to make installation as easy as possible in smaller sumps.

Product Specification

• Filtration Rating: up to 80 Gallons with a light bio-load or 50 Gallons with a heavy bio-load
• Footprint: 8/20cm
• Height: 15.5/39.5cm
• Max chamber diameter: 5 3/4 / 14.5cm
• Outlet size: 1 quick-precise adjustment valve
• DC Pump included
• Pump power consumption: 18W
• Controller included
• Requires approximately 3/4 / 2cm of clearance to remove the collection cup

Recommendations for Use:

We recommend running the Pro Skim 80 between 8 and 10 inches below the waterline. If your sump is deeper, we normally use PVC spacers made by simply cutting 1″ PVC pipe to the appropriate length and placing them under the base of the skimmer.